Taylormade r5 type d driver

S graphite shaft is a strong red color for a few inches below the grip, then gray the rest of the way to the head. This combination of colors, along with a bright yellow accent color, are repeated on the large, cushy headcover, which feels and stretches like neoprene and has a long sock-like extension at the end to protect the shaft while the club is in your bag.

Performance Whenever anyone asks me for advice on buying golf clubs, the first thing I always tell them is to get fitted before they buy anything. The experience Erik and I had with the r5 Dual Type N drivers on the course is a good example of why fitting is so important. We both had issues with the performance of the driver that could have probably been eliminated from the start with a properly fit shaft.

The main issue both of us had was with hitting the ball left off the tee. The r5 Type N is set up with neutral weighting, but we both found it to produce draws on a regular basis. Erik reported that other testers who tried the driver had similar experiences with the exception of one tester who usually hits a cut off the tee — he hit the ball straight with the r5 Dual Type N. Erik alleviated the problem by opening the face a few degrees at address, while I adjusted my setup by opening my stance a bit and playing for a fade.

Once we made these adjustments, the r5 really came to life. For me, the r5 had a medium trajectory and good roll in the fairway.

Erik found the trajectory a bit high, but found that the ball still got through the wind with ease. If you want to move them, spring for the Tour Preferred.

The thing I liked best about the r5 Dual Type N was the sound and feel at impact. It reminded me of the old Titleist D driver in both respects, only amplified, which is a very good thing. Conclusion If properly fit, the TaylorMade r5 drivers can be very good drivers.

Based on the experience Erik and I had with the Type N version of the driver, I would suggest the follow as a general rule:. If you hit the ball straight or fight a hook, you may want to look at the r5 TP or the r7 instead of the r5 Dual N. In all the r5 Dual drivers are a solid sidekick for the r7 Quad drivers in the TaylorMade product line, offering a size and type of performance for nearly any golfer.

With a heat gun, some patience, and a pair of needle noise pliers, you can easily remove the weights on the regular non TP R5. The weights in there are screwed in, but also epoxied, hence the need for a heat gun to remove them. I purchased the stiff 9. I am killing the ball when I hit it, and the ball going right down the fairway. My only complaint is that I am setting my tee very high for this club and it makes me a bit nervous.

Other than that….. This club is perfect for me. Does anybody know anything about the TaylorMade r5 XL driver? Is it an upgrade or update to the r5 Dual? I also have found that the R5 Neutral, has a tendency to draw. I usually have a straight ball flight and I have to adjust my swing to hit a little cut to get a straight ball flight out of it. I just bought this club, and based on what I am reading here I think I made the right choice.

I have to go to the driving range later and get a real feel for it, but based on what I have read, I will be happy. The non TP version has a closed face. The R5 dual type N is made in heaven. I have tried a lot of drivers already but this is the best I had. It is very easy to hit yards. Forgiveness and feel are excellent. I love my R5. I tend to hit a draw and thought this would be the exact for me, but I guess with the right shaft anything is possible.

I do find it hard to be consistent, one time the next Not the perfect one but the best that I could hit. It was consistent and mostly straight when I made good contact.

Tried many brands. Then tried the Ping G5. I think I may have to say goodbye to R5 and replace it with the G5. I bought the R5 Dual TP and love it. The TP features a Diamonte shaft as well as a square face. I have been using the R5 for almost a year now and I love it as well. I am having a problem with the ball going right and to fix that I have to set the ball outside my front foot which makes it very awkward to line up although it goes straight.

I can hit other drivers lined up normally. If anyone has any thoughts, please let me know. I have the R5 N type with Stiff shaft. Ive got this in neutral But soon as i got used to it 3weeks 4 rounds im nailing the ball about yrds.

But every now and then a loss of concentration makes a fade. However this is definately a worthwhile club to buy. To stop the fade all i do is close my wrists a bit more on impact but to move forwards into my swing sooner thus the ball is hit with a squarer club face. I tend to slice or fade when I dig in and really swing. My ball speed was around and I was hitting the ball yards and staying within an acceptable range off center line. INcluded in that yardage was yards of roll after initial ball mark.

The large, metallic black clubhead and the tiny Taylormade logo add to the look. Looking from the side or bottom, these drivers look quite high-tech and advanced.

The driver comes with the M. The cc clubhead gives excellent contact, confidence and consistently straight shots. According to the rules of the United States Golf Association, golf drivers must conform to predefined dimensions in terms of weight, length and head volume. The material of headclubs is also limited to avoid any undue advantage like excessive spring effect.

Many manufacturers produce non-conforming drivers intended for amateur weekend golfers. Though it comes with some amazing features and design modifications that result in higher ball velocity for longer and more consistent drives, the Taylormade R5 driver is made to conform to the rules set by USGA and is legal to use. The Taylormade R5 Driver features a large cc clubhead with a high moment of inertia to suit any player looking for extra distance and forgiveness off the tee.

The driver comes in two different options of head types — N with neutral weighting for players who like working with the ball both ways and D that promotes a draw. The headcover gives the driver a bold presentation. It comes with a M. S — 65 graphite shaft in red color for few inches and then gray for the rest up to the head.

Those who prefer large driver heads would find the Taylormade R5 driver the right match and it comes in two configurations to make sure it fits your game perfectly. The Type N is set up with a neutral setting for different types of players to give an excellent ball flight, feel and distance performance. This version of the R5 driver is a great choice for players on a budget. It can cater to any level of golfer.

The type D driver is designed to promote a draw and gives amazing fall flight and distance performance. With an amazing design and advanced technology, the Taylormade R5 driver is the right choice for players of any level. It offers a high, nice fall flight and easy workability. It is an amazing driver for those who are looking to hit the ball straight and achieve some forgiveness on mishits. If fitted properly, the R5 can be solid drivers offering the type of performance any golfer would expect.

Your email address will not be published. Save my name, email, and website in this browser for the next time I comment. Have you ever wondered why sets of golf clubs have so many clubs?

Have you ever wondered what the difference is between each golf club? Have you ever wondered why different golf clubs are made at different angles? Well, look non further in this article; we will explore all of the above! Why do golf….