Program cox cable universal remote

Its a code in manual which forces the remote into the search mode. The above method might take some extra time but it is very important to find your key code.

Once you have done the above procedure your remote should be working for all the in functions. In this blog post we have mentioned each and every Universal Remote Codes for COX, still if you have any issues about the above universal remote codes or if we skipped to mention some codes then leave a comment we will rectify the faults and also we will mention those COX remote codes.

The LED light indicates the device is ready to program. Device should turn on. If it starts, try changing the channel to verify that remote is programmed correctly. LED of Device will blink twice for confirming the code stored. Turn on the TV you want to program. Press and release the TV key. Find your TV brand from the list of codes either in your paperwork or online. Press and hold the Mute and Select buttons at the same time until the TV key blinks twice. Once you see the two blinks, release both keys.

Enter the first four-digit code listed for your brand. Press the Power key to test TV control. If your TV turns off when you press the power button, your correct code was automatically saved. If none of the codes work, proceed to your paperwork or the online version of the guide titled Searching for Your Code.

How to program a Cox Contour remote for a device. Turn on the device you want to program. Find your device and brand from the list of codes either in your paperwork or online.

Press and hold the Mute and Select buttons at the same time until the device key you selected earlier blinks twice. Enter in the first four-digit code listed for your brand. Press the Power key to test device control. If the device turns off, your correct code was automatically saved.

If none of the codes work, proceed to the information section Searching for Your Code—that information is found in your paperwork or the online version of the guide. Insert the batteries and activate them by removing the pull tab on the back. Wait for the Status indicator light to blink blue three times as your remote powers up for use.

Press the Voice Command button and follow the onscreen prompts. How to program a Cox Contour 2 voice remote to pair with another Contour receiver.