Install dhcp windows server 2000




















Your email address will not be published. Learn about the latest security threats, system optimization tricks, and the hottest new technologies in the industry.

Over 1,, fellow IT Pros are already on-board, don't be left out! You can install DHCP during the initial installation of Windows Server , or after the initial installation is completed. After you have installed the DHCP service and started it, you must create a scope. Microsoft recommends that, each DHCP server in your environment has at least one scope that does not overlap with any other DHCP server scope in your environment.

The following sections explain how to troubleshoot some of the issues that you may experience, when you try to install and configure a Windows Server based DHCP server in a workgroup. This issue can be caused by a network problem, or because the DHCP server is unavailable. When the DHCP server started and other clients can obtain valid addresses, verify that the client has a valid network connection and that all the related client hardware devices including cables and network adapters are working properly.

After installing the DHCP-server , you will need to configure it before you can use it:. After installation, a DHCP server is not authorized.

Do not forget this later! A definition of a range of IP-addresses with or without additional options is called a " Scope ": select your DHCP-server and then either with a right-click or from the menu "Actions" select to define a " New Scope ":. Define the range of IP-address and the subnet-mask. Select a range, which does not include the IP-address of the server itself or any other device with a manually assigned IP-address like: network printers.

Although you could exclude them in the next step, usually a range is reserved for such manually assigned addresses and then the rest in this case: - is given to the DHCP-server for automatic distribution. This avoid running out of addresses, when visitors to you office connect to the network and get an IP-address assigned.



0コメント

  • 1000 / 1000